While we've lost count of the classic bikes we've repaired and restored here at the shop, our sense of wonder at the unusual and beautiful products of the last century is far from dead. When this 1959 Apollo rolled through the door, we realized early on that under all the surface corrosion and cracking rubber we'd find a gem. Some might call it an antique, but this classy old roadster has a new lease on life and a new chance to get out there onto the pavement. We had a great time working on it, and thought we'd share a little!

A shot of the bike before any work was done.

Steel wool, if you didn't know, is excellent at removing corrosion from chrome.

Left = pre-polishing, right = post-polishing.  So shiny!

The finished product.

Check out those sweet rod-actuated stirrup brakes.

They really don't make them like they used to.

Time and leather treatment and more time.

Shiny means smooth braking.

So clean you can see me in it!

I’ll admit it.  I’m a little jealous that Seattle gets a Snowpocalypse before Chicago does.  I take pride in my city’s brutal winters.  So now that Seattle has had its fun it’s finally Chicago’s turn to play in the snow.  And while Fritz may happily snip zip ties off his bike now that things are back to normal over there I’ve got three inches of snow on the ground and more on the way.  In a matter of days the plows will shove all the snow in the valuable lanes of pavement I like to ride in, and soon after that all that snow will be compacted into something far more slippery than snow.  So, sure, Seattle gets “battered” once or twice every year, but what about real winter? 

What about many sub zero days, lots of scorching cold winds, the possibility of frost bite, snow, ice, more snow, more ice, and the inevitable lake effect misery that is the reality for all us crazy Midwestern winter riders?  What good is a bike commute if every time I swerve to avoid a collapsed catch basin or perilous pot hole, I lose traction and end up a pile of painful person underneath my bike?   Anyone who has attempted to ride down the lakeshore path will know what it’s like to see the sheen of a vast expanse of ice ahead.  When I was younger and I rode my 1977 Trek TX550 through such conditions, I just barreled through and braced for what I knew was going to be a couple of very uncomfortable moments.  But that was back when I trusted my patellae wouldn’t shatter upon impact, before I had any sort of thoughts that some injuries are more than just annoying to walk away from and some pain is too great to ignore. 

Anyway, what do we do about the dangers of an entire winter of ice and snow?

The Answer is studded tires.

These are the Schwalbe Marathon Winters I like to use.  (and that’s Chris in the background)

These things are great.  Greater, I might argue, than the zip tie snow chains.  And I might argue this because, well, I’m a bit too classy to be uglifying my stately Dutch bike with silly little zip ties.  (Kudos to you, Fritz, for choosing such a bright and safe color for your snow chains.  Safety first!) Seriously though, if you plan on riding through an entire winter, the studs will save you just when you need saving.

Remember when Fritz boasted of his uncanny placement of the zip ties so that they bit into the ice while cornering?  That’s the whole idea behind the placement of the carbide studs in the Schwalbe Marathon Winters.  The studs are arranged so that when running at full pressure your tires will primarily be making contact with the road right in the middle, on the rubber.  When you start cornering, the studs will do their job.  Of course, when the roads do get totally nasty, and the ice and hard pack snow is everywhere, you might just want to lower the pressure and let the carbide studs do their thing all the time.  With the increases contact area of a soft tire, the studs give you way more traction. 

With 240 metal studs on 700cc tire I feel secure on my ride no matter what I roll over, I’ll keep my wheels underneath me.   They also have the Schwalbe standard reflective strip on the side wall which makes me feel not only bijster (very) European but also bijster visible. 

It’s true. You will sound like a swarm of bees when pedaling along dry clean pavement.  But the advantage when you need it is well worth the noise.  And when you arrive to work, or the bar, or back home again all in one piece, everyone will be very happy to see you.  

We’ve got the tires in stock now, and we’ll get just about any size you need.  Heck, I’ll even put them on free of charge.  That’s how much I care about your safety.

SNOWPOCALYPSE!

No matter how much we swear we've learned our lessons, Seattle always seems to get caught by surprise by the snow. There we were, minding our own business with our feet all toasty in our sandals and socks, when the temperature plummeted and it turned into Juneau in January. While this year the City did a much better job than last year at preventing widespread carnage and destruction, we at Dutch Bike Seattle still didn't bring in studded tires because it never snows in Seattle. Even if we had stocked them, I'm not sure they'd sell because it never snows in Seattle, right?

We found something else, though. Something else entirely.

You're not going to believe it at first.

It's quick, it's cheap, and yes, it looks completely ludicrous.

BUT. It works. It works beautifully.

I can accelerate, brake, and corner with aplomb, even on the vile snowpack/sheet ice mix the plows leave in the bike lanes. The zip ties dig nicely into the hardest packed surfaces, but they're thin enough not to bounce the bike around at low speed or on short pavement sections.

I've cunningly positioned the tie heads to dig in as soon as the bike goes into a corner while staying up and off the ground in a straight line. This is the place that the ties are most likely to interfere with the fenders, so if you're installing these yourself be careful to make sure you have or can create the clearance.

It is at this point that I must admit that I didn't dream up this amazing technique. It pains me to admit this not because my ego suffers, but because the zip-tie-DIY-bicycle-snow-chains idea appears to have originated with my favorite bicycle industry whipping boy: fixed gear hipster culture. Several years ago, I'm sure, some bright child with extremely tight pants and an asymmetrical haircut had a genius-caliber idea, and I hate that it wasn't me. So here it is: Fixed gear street bike hipster guys, I'm sorry for the things I've said over the years. It's not true that the only drink you like is 4Loko. It's also not true that you're not allowed to wear shoes that don't match your bikes. You can wear whatever you want. And finally, you have come up with a good idea besides brightly colored deep-section rims.

Fall is here!  Which means, for those of us living here in Seattle, rain.  A lot of rain.  Driving rain.  Endless driving rain.  I’m pretty sure that last November it actually rained every day.  However, any experienced Northwestern cyclist can tell you that the best way to combat the crushing depression of the winter months (other than maybe buying a SAD lamp) is to keep riding your bike!  And what this means, is fenders. 

There are many different types of fenders.  Because I insist on riding completely impractical bikes, my only option are the clip on, or “fairly ineffective,” type of fenders.

These fenders are convenient because they simply clip on to the seat stays and fork blades of the bike, and don't need any eyelets or mounting hardware.  They’re inconvenient because they don’t really work very well, and as a result my bike is always dirty

and my feet are always wet and sad.

So, despite the more involved mounting process, full fenders are a better option.  They provide much greater coverage, which is great for your bike because it keeps it clean, prolonging the life of your components, and great for you because it keeps you more dry, prolonging the life of your ride.  A great example of full fenders are the ones that Fritz has on his bike.  Look at that clean bike!

And look at those happy feet!

“But wait!” you might say.  “I ride a racy road bike! I don’t have room for fenders! Or eyelets!”  Not to worry!  Both Fritz and myself have extensive experience putting together custom fenders to fit on even the most race-oriented carbon fiber speed machine.  There are several ways we can do this, but our most common method is to actually fabricate some mounts out of rack struts (thin, rectangular pieces of steel) and use these to clear the tight spaces in between the tires and brake calipers.  In the case of bikes without eyelets, we can use different types of clamps to keep the fender stays attached to the frame.

So why wait! Get some fenders! Keep your feet dry!

We've carried bikes from Linus for more than six months now, and in that time we've sent a surprising number of the little guys and gals out into the world in both Chicago and Seattle. It's been a pleasure to see them locked to bike racks downtown in the Loop , rolling down the Burke Gilman, and hanging from the chain link outside bars on Capitol Hill in Seattle. I've seen them used for commuters, bar bikes, kid haulers, and “couples' cycling incentives.” Just as Linus riders seem to have discovered the versatility of the design, we've had a great time expanding the capabilities of the bikes themselves. Here are a pair of the projects Alex and I have set up with some of the bikes. We've had a huge amount of fun thinking up ways to keep the Linus style undiluted while adding function and some new ways to ride!  If you cold winter riders are  looking to set up your Linus, Chicago Schwinn or  Raleigh with a similar light set-up ask us about the Schwalbe studded tires for winter riding.  

Classic headlight, classic tire generator, classic Roadster 3, and a nice warm yellow halogen beam.

Live on the top of a monster hill? The SRAM i-Motion 9 hub nearly triples the gear range of this Dutchi.

Dream it up and your Linus can probably do it.

We've been repairing, maintaining, and upgrading all types of bikes here at Dutch Bike since day one, because while we love the somewhat exotic (here in the US, at least) mechanical aspects of the bikes we import, one of our core beliefs is that the best bike is the bike that you ride, whatever it is. Whether we're installing custom fenders on your 90's Bianchi racer or overhauling your 1976 Schwinn cruiser, we love keeping bikes on the road.

Particularly in the past two or three years, I've seen a massive upswing in the numbers of bikes being brought out of storage, bought used, or restored for everyday use. All types of reasons – economic, practical, or ethical – bring these faithful steeds back into harness, but my favorite of all is that it just seems to have become cool. With increasing numbers of bicycles on the road – many of them seeing their second tour of duty – every shop is seeing an increase in repair traffic and, more relevantly, more people are becoming acquainted with the world of bike repair.

For many, getting a bike repaired can be even more intimidating than “taking the car in.” I will be the first to admit that bicycle service shops do not have a stellar reputation for friendliness or customer service, and even though a bike is less complex than a car it can still be an opaque and mysterious opponent when it's not working properly. For these very good reasons, a large number of my service customers don't come to the shop for anything as specific as wheel truing or derailleur hanger alignment, but rather for a general tune-up. It might be every few hundred miles or every few years, depending on where and how you ride, how your bike is designed, and how it's stored and cared for. Whether your mechanic calls it a “tune-up” or a “general service” or a “maintenance package,” the basic idea is the same: make my bike work so I can keep riding it. You drop your tired, creaky steed at the shop, and a day or two later you pick it up shiny and ready for another ride. What actually happens to the bike, though?

As you've seen in previous posts, I enjoy few things more than deflating the fear and mystery around the technical side of bicycles, and so today we'll walk through exactly what goes on during a tune-up. Different tune-ups will include a variety of different operations (wheel truing, adjustment, part replacement, etc.), and different shops will provide a sometimes bewildering variety of options and levels of detail. The tune-up you'll see here is our “Comprehensive,” usually best for older bikes or commuters with medium to high mileage. If the bike requires less I'll suggest a less in-depth “Standard” or “Basic,” or simply perform a few adjustments a la carte.

First, I'll remove the wheels to make cleaning the bike easier and because I'll be working on them individually later. I'll spray and wipe down the frame and components with a weak cleaning solution (I like Simple Green), because it's much more pleasant to work on a clean bike.

Now for the wheels: cleaning first, then truing and balancing spoke tension.

Next I'll open the hubs to check the bearings and inject fresh grease. When I put them back together, I'll be sure to adjust them so that they'll spin smoothly when they're installed.

Back on the bike, I'll do the same to the headset and bottom bracket bearings if they can be serviced. Before I reinstall the wheels, I'll sand and pick debris out of the brake pads for stronger and quieter braking.

Now that the pads are clean and grippy, I'll adjust the pad position and spring tension of the brakes so they'll work powerfully, quietly, and drag-free.

With the brakes “dialed,” I'll move on to the derailleurs; adjusting the cable tension and limit screws, and the position of the derailleurs themselves to optimize the speed, smoothness, and above all the accuracy of each gear change.

Finally, I'll check the tire inflation and take the bike for a test ride to make sure everything is working perfectly!

As you can see, there's no mystery and no magic here, but the proper tune-up should have your bike riding like new – or at least close to it – and keep you going for plenty of rides. Having your bike tuned may not be the most glamorous, but the cumulative positive effects of a smoothly functioning bike can be far-reaching!

Dutch Bike Co. is sponsoring an Alleycat! The race is this Saturday, October 2^nd, organized by the UW student food cooperative.  Registration begins at 1:00 at Recycled Cycles, with racing to start at 2:00.  There is a $10 registration fee, and all proceeds from the race will benefit the UW Student Food Cooperative, a student run organization dedicated to bringing organic, affordable and healthy food to the UW campus, currently working to set up a food cart in red square.

 If you’re not familiar with Alleycat racing, it’s an informal style of bike race, originating within the bicycle messenger community in the late 1980’s.  Designed to test a racer’s geographic knowledge and traffic handling skills as much as their speed, the race is organized around a series of checkpoints rather than a set course, leaving it up to the rider to determine the fastest route.  The checkpoints are traditionally unknown until the start of the race, when the riders are given a “manifest” with the checkpoint addresses and any other pertinent information.  First person to make it through all the checkpoints and to the finishing destination wins!

 This particular Alleycat is set up “point to point” style, where at each checkpoint the subsequent checkpoint is revealed until the finish.  All in all, the course should be around 15 miles, depending on how polished your navigational skills are.  Prizes include $175 worth of gift certificates to bike shops around town, sweet swag from Chrome, and an afternoon on our very own Conference Bike.

So come out! All cyclists are more than welcome. Support a good cause and have a great time!

Welcome to the Dutch Bike Café!

This is Brian, the lead Barista at the new Dutch Bike Café that is located right in the heart of old Ballard in the Dutch Bike Co. Take a break from shopping for your Workcycle or a Bakfiets and check out our new coffee locale! I’m excited to let you know about the refined focus on coffee and espresso in our warm and inviting new café.  

We are using locally roasted Lighthouse Coffee, and getting compliments and winning loyal regulars right from the start. The espresso profile is rich and warm with lingering notes of cocoa and a dry finish, much like a good red wine. To showcase the fresh roasted beans we are offering great drinks like the macchiato: which is espresso with a touch of steamed milk. We call it “the world’s tiniest latte." The doppio -- simply a double shot of espresso in a cute little cup & saucer -- is another great way to savor the flavor of the espresso. If you’re a traditionalist we have piping hot French press coffee all-day for your “drip coffee” experience.

Pair any of our great espresso drinks -- like the cinnamon and vanilla infused cappuccino -- with a lunch sandwich hot from the grill or one of Julie’s famous Salted Chocolate Chip Cookies and you are in for a tasty and enjoyable treat!

Plenty of folks are stopping in for a cup of morning joe and a breakfast sandwich. We also see a lot of you swinging in with your bikes for a tune-up and to test ride the great selection of bikes at the shop and to have a latte with friends.

Stay tuned for more updates on our fabulous baked goods, ice cream sandwiches, and espresso delights!

Hey there! This is Alex, the newest addition to Dutch Bike Seattle, coming to you with my inaugural blog post.  Born and raised in Seattle, I graduated from the University of Washington in 2008 and have been wasting my anthropology degree working in the bike industry ever since. For blogging purposes, I’m going to start of by focusing on events and other fun things to do on a bike, whether specifically bike related or not.  To that end, here’s the post, about how I spent the 4^th of July:

4^th of July! Fun! Family! Beers! Hotdogs! Bicycles? Here at Dutch Bike, we say yes. What better way to celebrate the birth of our country than by celebrating your independence from traffic jams and fossil fuels? To that end, I spent a good chunk of my 4^th of July at the Arboretum riding bikes and just hanging out.

The real impetus for the gathering (other than just having a good time) was the third annual 4^th of July Sprints, held again this year at the bridge to nowhere at the Washington Park Arboretum.

The bridge to nowhere, if you’re not familiar with it, was originally constructed to be an Interstate 5 bypass from I-90 to Route 520, but then abandoned due to environmental concerns. Today it sits unused except for the occasional person brave enough to dive from the high point of the bridge into lake Washington below.

Though the event was ostensibly a competitive one, the atmosphere was decidedly laid back.  Not being much of a racer myself, I chose to spend most of my time just watching and talking.  Eventually the day proved itself to be a true Seattle 4^th of July, and the rains came, moving us down the bridge under shelter.  Which just goes to show, one of the most important characteristics you can have when biking in Seattle (in any season!) is adaptability.

If you’ve never been (or just never ridden) to the Arboretum, it’s something I would heartily recommend checking out.  The array of flora present ensures that it’s beautiful in most seasons, and it’s home to one of my favorite places in Seattle, the Japanese gardens.  Perhaps most importantly, access is extremely bike friendly, with a number of routes to take depending on where you’re coming from. So the next time you’re in the neighborhood, you should stop by! Have a picnic, drink some wine, and have a great day on your bike.